DYN-Flag
Wire identification with the print applicator DYN-Flag -
Increased productivity and process reliability
The DYN-Flag offers exact and second-by-second identification with wires and other round parts
General information
The wire identification system DYN-Flag is an ideal combination of a thermal transfer printer and an application unit. This combination allows, with higher process reliability and constant high identification quality to realise valuable increase of productivity.
The system either can operate as stand-alone-tool or online in real-time and can be integrated in most of operative processes. Short changeover times and an easy handling show s high user-friendliness.
The label layout can be created via a graphical label production software. It is possible to save several layouts on the memory card of the printer.
Technical data |
|
| Print method | Thermal transfer |
| Resolution | 300 dpi / 600 dpi |
| Speed of motor shaft | Max. 500 mm / sec. |
| Memory | Up to 14 programs |
| Electrical power supply | 230 V / 50 Hz |
| Input power | 1250W |
| Wire diamete / -minimum length |
0,5 mm - 20 mm / 90 mm |
| Label role- core diameter |
76 mm |
| Role-Outerdiameter | 205 mm |
| Labelformat | 15 x 50 mm 35 x 150 mm |
| Tool-cycle time | 6-8 sec. |
| Repeat accuracy of the adhered labels | > +/-0,6 mm / +/-1mm |
| Interfaces standard | RS232 8bit; USB 2.0; Ethernet 10/100 Base T |
| Interfaces optional | Centronics nach IEEE 1284; RS422; RS485; WLAN802.11 b/g |
| Measures (BxHxT) | 500 x 500 x 930 |
| Sound | < 65dB |
| Degree of protection | IP30 |
